Comelit HDDVR080A Manuel d'utilisateur télécharger pdf (Page 17)

3.3.2 Record stream

Step1: enter into system configurationrecord configurationrecord bit rate

Step2: setup rate, resolution, quality, encode and max bit stream

Step3: user can setup all channels with same parameters, tick off “All”, then to do relevant setup.

Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button

to exit current interface.

Note: if the rate value set is over high the maximum resources of the device, the value will be

adjusted automatically.

Definitions and descriptions of Record stream:

Parameter Meaning

Resolution Support 1080P,

FPS 4 CH HD DVR 1080P@7FPS(6FPS)

8 and 16 CH HD DVR 1080P@15FPS(12FPS)

Quality The quality of recorded images. The higher the value is, the

clearer the recorded image is. Six options: lowest, lower,

low, medium, higher and highest.

Encode VBR and CBR

Max bit stream Range from 1536kbps~12288kbps

3.3.3 Time

Step1: enter into system configurationrecord configuration time; refer to Fig 4-12:

Fig 4-12 record configuration-time

Pre-alarm record time: the record time before event happen i.e. record time before motion detection or

sensor alarm is triggered.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 59 60

Pas de commentaire

Comelit HDDVR080A Manuel d'utilisateur Page 17